293
TROUBLESHOOTING
(Continued)
Eb
Indoor fan air
volume forced
setting in
shutdown
status
Ec
Indoor fan air
volume forced
setting when
temperature
control is OFF
Ed
Indoor fan air
volume forced
setting when
temperature
control is ON
[ Display when all indoor units are selected ]
Alternately displayed
→
←
※ After this, LED 6 and 5 display code number and indoor unit number alternately.
In this figure, code number is displayed.
↓
Press [SET] switch
During command setting
During automatic setting During forced setting (0 → 3)
→
←
Switch by pressing [UP] + [DOWN] switches simultaneously for 1 second
↓
Change the setting data
with [UP] or [DOWN] switch
(0 ~ 3, 5)
Switch by pressing [UP] +
[DOWN] switches simultane-
ously for 1 second
↓
Press [SET] switch
↓
Press [SET] switch
Return to select command (setting is completed)
Indoor fan air volume in shutdown status setting Completed
Automatic setting is completed. Forced setting is completed.
※ Forced setting of indoor fan air volume is automatically cancelled in 10 minutes
Code No. /
functions
Operational procedure / display contents
Display of all indoor unit selection
To Next Page
Loading...
Need help?
General