292
TROUBLESHOOTING
Code No. /
functions
Operational procedure / display contents
Eb
Indoor fan air
volume forced
setting in
shutdown
status
Ec
Indoor fan air
volume forced
setting when
temperature
control is OFF
Ed
Indoor fan air
volume forced
setting when
temperature
control is ON
Monitor mode
Displays forced setting status of indoor fan air volume in shutdown status (code No. Eb) / when
temperature control is OFF (code No. Ec) / when temperature control is ON (code No. Ed).
Indoor fan air volume forced setting during thermostat OFF : When the setting of indoor unit
No. 35 is fan air volume 1
Alternately displayed
→
←
Indoor fan air volume forced setting during thermostat ON : When the setting of indoor unit
No. 2 is automatic
Alternately displayed
→
←
※ The [INDOOR UNIT] switch selects indoor unit. Each time the switch is pressed, indoor
unit registration order goes up by 1. After the last registered indoor unit, it goes back to
the first registered unit.
※ Indoor unit number display is changeable between "air net address" and "registration or-
der" with code No. E0. (In the case of "air net address", only last 2 digits are displayed.)
Indoor fan air volume displays are as follows
0 : Stop
1 : Very low
2 : Low
3 : High
5 : Very high
Auto : Automatic
Command mode
Programs forced setting/cancel of indoor fan air volume.
Example) Method of indoor fan air volume in shutdown status of indoor unit No. 19
Select command Displays indoor unit No. 40 setting
Alternately displayed?
→
←
↓
Select the indoor unit with [INDOOR UNIT] switch
Select command Select indoor unit No. 19
Alternately displayed?
→
←
※ The [INDOOR UNIT] switch selects indoor unit. Each time the switch is pressed, indoor
unit registration order goes up by 1. After the last registered unit, it goes to all indoor unit
selection. After all indoor unit selection, it goes back to the first registered unit.
To Next Page
Loading...
Need help?
General