Akai MPC Touch User Manual

223
• Pad Start: Click and drag this field up or down to
determine the position (in samples) where the pad’s
playback will start. Alternatively, double-click the
field and type in a number. The minimum value is 0,
and the maximum value is the Pad End value.
• Pad End: Click and drag this field up or down to
determine the position (in samples) where the pad’s
playback will stop. Alternatively, double-click the
field and type in a number. The minimum value is the
Pad Start value, and the maximum value is the
sample’s total length (in samples).
• Pad Loop: Click this box to activate or deactivate
Pad Loop. When activated, you can hold down the
pad to cause that sample to repeat from the Loop
Position (Loop Pos) to the end of the sample.
Release the pad to stop the repeating playback.
Important: For Pad Loop to work, you must set
Sample Play (in the Key Group section) to Note On
instead of One Shot.
• Loop Pos (position): Click and drag this field up or
down to determine the position (in samples) where
the pad’s playback will repeat when Pad Loop is
activated. Alternatively, double-click the field and
type in a number.

Akai MPC Touch Specifications

General

Display type	LED
Built-in display	Yes
Product color	Black
USB direct playback	-
Built-in optical drive	No
Audio (L/R) in	2
Minimum RAM	4 GB
Minimum processor	Dual Core
Minimum processor speed	2.5 GHz
Minimum storage drive space	2048 MB
Mac operating systems supported	Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.9 Mavericks
Windows operating systems supported	Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64, Windows 10 Home, Windows 10 Home x64, Windows 10 Pro, Windows 10 Pro x64, Windows 8