Akai MPC Touch User Manual

238
To record with the Looper:
Important: To record without erasing any audio you’ve
already recorded in the loop, use the Overdub button.
To overwrite the audio you’ve already recorded, use the
Replace button.
• If Record To is set to Play:
To start recording, tap the Replace or Overdub
button as the loop is playing. The Looper will
start recording immediately.
To stop recording, tap the Replace or Overdub
button. The Looper will stop recording but
continue playing.
To stop playback and recording, tap the X/Play
button.
• If Record To is set to Overdub:
To start recording, tap the X/Play button on the
touchscreen.
If Sync is off, you can also speak/sing into the
microphone or play your audio source so that
the input level reaches the threshold value.
If Sync is on, you can also press the Play or
Play Start button to start playing a sequence;
recording will start when the sequence starts
on Bar 1.
To stop recording, tap Overdub. The Looper will
stop recording but continue playing.
To stop playback and recording, tap the X/Play
button, or press stop to stop sequence playback.

Akai MPC Touch Specifications

General

Display type	LED
Built-in display	Yes
Product color	Black
USB direct playback	-
Built-in optical drive	No
Audio (L/R) in	2
Minimum RAM	4 GB
Minimum processor	Dual Core
Minimum processor speed	2.5 GHz
Minimum storage drive space	2048 MB
Mac operating systems supported	Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.9 Mavericks
Windows operating systems supported	Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64, Windows 10 Home, Windows 10 Home x64, Windows 10 Pro, Windows 10 Pro x64, Windows 8