245
Mute
When the Mute tab is selected, mute the currently selected track, program, return, submix, or master by
doing any of the following:
• Turn the Data Dial.
• Use the –/+ buttons.
• Press the pad.
• Tap the pad in the touchscreen.
When a track, program, return, submix, or master is muted, its M button will light red.
Send Levels (Programs and Submixes only)
When the Send tab is selected, use the Data Dial or –/+ buttons to adjust the send level of the currently
selected program or submix.
The level sliders in each pad show a visual representation of the level. Double-tap a pad in the
touchscreen to open a large version of the level slider.
You can use up to four send channels. Tap the Send button to cycle through the four available slots for each.
To learn how to use send effects, please see General Features > Effects > Send/Return Effects.
Important: When using send channels, make sure you have already loaded an effect to it using the
return mixer. See Return Mixer below to learn how to do this.
To Next Page
Loading...
