Akai MPC Touch - Page 63

63
Alternatively, load samples into a drum program this way:
1. Press Menu and then tap Program Edit to enter Program Edit Mode.
2. Tap Samples at the bottom of the touchscreen. This lets you view the samples assigned to all four
layers of the current pad as well as tuning and level parameters for each layer.
3. Tap a pad to select it. The pad will be lit green.
4. Tap the field for a layer, and then use the Data Dial or –/+ buttons to select a sample. Alternatively,
double-tap the field for a layer, and then tap a sample to select it.
Tip: Press Q-Link to select the first bank, and then use the Q-Link Knobs to quickly select a sample
for each layer of the selected pad.
Tip: Remember that a drum program has 128 pads total—16 pads across 8 banks.
The Samples tab in Program Edit Mode.