83
To load a master insert effect in the Channel Mixer:
1. Set the Mixer field in the upper-left corner to Masters.
2. In the touchscreen, tap the pad that corresponds to the desired master output (Outputs 1/2,
Outputs 3/4, etc.). Alternatively, double-tap the Outputs field below the Mixer field.
3. Tap the pencil icon next to Inserts, and then use the window that appears to load or edit effects.
Alternatively, tap the Insert tab at the bottom of the touchscreen (tap it multiple times to select a
different insert slot), and then double-tap the desired pad in the touchscreen. You could also use the
Data Dial or –/+ buttons to select an effect immediately.
To Next Page
Loading...
