87
Programs
You can set the send levels for programs in the Channel Mixer only.
To set the send levels for a program:
1. In the Channel Mixer, set the Mixer field in the upper-left corner to Programs.
2. Tap the Send tab at the bottom of the touchscreen (tap it multiple times to select a different send level).
3. In the touchscreen, tap the pad that corresponds to the desired program. Alternatively, double-tap
the Program field below the Mixer field.
4. Use the Data Dial or –/+ buttons to set the send level. To make finer adjustments, double-tap the
pad and adjust the larger version of the slider that appears.
Submixes
You can set the send levels for submxies in the Channel Mixer only.
To set the send levels for a submix:
1. In the Channel Mixer, set the Mixer field in the upper-left corner to Submixes.
2. Tap the Send tab at the bottom of the touchscreen (tap it multiple times to select a different send level).
3. In the touchscreen, tap the pad that corresponds to the desired submix. Alternatively, double-tap the
Submix field below the Mixer field.
4. Use the Data Dial or –/+ buttons to set the send level. To make finer adjustments, double-tap the
pad and adjust the larger version of the slider that appears.
To Next Page
Loading...
