93
When viewing the pad channel strip:
• The first field shows the current pad number. Press a pad or tap
the field to select a different pad.
Tip: This is useful for mixing your pads without having to enter the
Pad Mixer.
• The second field shows where the pad is routed, which you can
change. Usually, this is set to Program.
• The Inserts field shows any enabled or disabled effects for that
pad. Tap the pencil icon to open a window where you can change
and enable or disable the effects.
• To solo or mute the pad, tap Solo or Mute (respectively).
• To change the panning or level of the pad, adjust the pan knob or
Level slider.
When viewing the program channel strip:
• The first field shows the current program number and name, which
you can change.
• The second field shows where the program is routed, which you
can change.
• The Inserts field shows any enabled or disabled effects for that
program. Tap the pencil icon to open a window where you can
change and enable or disable the effects.
• To solo or mute the program, tap Solo or Mute (respectively).
To Next Page
Loading...
