Vertical rack mounting
Please observe the following rules for vertical rack mounting:
• A maximum of 10 units (2 blocks - 5 units) can be mounted within one rack. In
that case a heat baffle should be placed in the middle of the rack as shown in the
figures below.
• The minimum distance between two blocks must be 400 mm [15.748”] if no heat
baffle is used (measured from top of the lower block to bottom of the upper block).
Figure A-2 Vertical mounting (AM/AMS, DC)
Rack
Heat Baffle
AM/AMS
AM/AMS
AM/AMS
AM/AMS
AM/AMS
AM/AMS
AM/AMS
AM/AMS
AM/AMS
AM/AMS
bar
bar
bar
bar
Mounting rules
AM/AMS units (DC powered)
...................................................................................................................................................................................................................................
365-312-802R7.2
Issue 4, June 2007
Alcatel-Lucent - Proprietary
See notice on first page
A-3
To Next Page
Loading...
