Result: The active and backup stores are switched. The ITM-CIT loses its
connection to the network element. The NE resets. This takes about 10 minutes.
...................................................................................................................................................................................................
6
Login to the NE again and select
Provisioning → Equipment → NE Software Configuration again.
Result: The NE is now using the software that was previously in the backup store.
The NE Software configuration window shows that the current content of the active
and backup store. The Active Store State is Store Active Not Committed. If the NE
software in the active store is not committed within 2 hours, the NE will switch the
stores back to its previous settings.
...................................................................................................................................................................................................
7
Select Edit and click Commit in the Edit NE Software configuration window.
Result: The software in the active store is committed. The Active Store State
becomes Store Active. The NE will not switch back to its previous settings.
E ND OF STEPS
...................................................................................................................................................................................................
Installation trouble shooting
Installing the NE software
...................................................................................................................................................................................................................................
B-6
Alcatel-Lucent - Proprietary
See notice on first page
365-312-802R7.2
Issue 4, June 2007
To Next Page
Loading...
