Alcatel-Lucent 7210 SAS-D - Page 294

Command Hierarchies
Page 294 7210 SAS D, E, K OS Basic System Configuration
Show Commands
show
— alarm-contact-input alarm-contact-input-id [detail]
— alarm-contact-input all
— chassis [environment] [power-supply] (The ‘environment’ option is supported only on 7210 SAS-E and
7210 SAS-D. The ‘power-supply’ option is applicable only to 7210 SAS-D ETR)
— cron
— action action-name [owner owner-name]
— action run-history [run-state]
— schedule action-name [owner owner-name]
— script script-name [owner owner-name]
— tod-suite tod-suite-name [detail] associations failed-associations
— time-range name associations [detail]
—system
— alarms
—
— connections [address ip-address [port port-number] [detail]
— cpu [sample-period seconds]
— global-res-profile [detail]
— information
— lldp
— lldp
— memory-pools
— ntp [{peers | peer peer-address} | {servers | server server-address} | [all]] [detail]
— resource-profile [active|configured]
— ptp [peer ip-address [detail] | peers [detail] | unicast | statistics | standby]
— sntp
— sync-if-timing
— thresholds
— time
— vwm-shelf vwm-shelf-id [detail] (Supported only on 7210 SAS-E)
— time
— system
— oper-group [group-name]
— oper-group group-name [detail]
— oper-group group-name [monitoring]
— uptime