Alcatel-Lucent AOS-W 6.5.3.x - Page 952

952| Voice and Video AOS-W 6.5.3.x| User Guide
Table 232: DSCP Values
Lync/Skype
for
Business
Application
DSCP Mapping
Voice 56
Video and
desktop
sharing
40
File transfer 24 (Best-effort)
You can configure the DSCP mappings in the SSID profile using the following CLI command:
(host)(config) #wlan ssid-profile Skype4b_ALG
(host) (SSID Profile "Skype4b_ALG") #wmm
(host) (SSID Profile "Skype4b_ALG") #wmm-vo-dscp 56
(host) (SSID Profile "Skype4b_ALG") #wmm-vi-dscp 40
(host) (SSID Profile "Skype4b_ALG") #wmm-be-dscp 24
Disable Media Classification
Media classification is not supported when clients are accessed through a network address translation (NAT).
Media classification should not be configured on session ACL for Secure SIP used by Lync/Skype for Business
clients. The following example verifies if media classification is configured on session ACL that is associated with
the user-role, "employee":
(host) #show rights employee
Derived Role = 'employee'
Up BW:No Limit Down BW:No Limit
L2TP Pool = default-l2tp-pool
PPTP Pool = default-pptp-pool
Periodic reauthentication: Disabled
ACL Number = 64/0
Max Sessions = 65535
access-list List
----------------
Position Name Type Location
-------- ---- ---- --------
1 employee session
employee
---------
Priority Source Destination Service Action TimeRange Log
-------- ------ ----------- ------- ------ --------- ---
1 any any svc-sips permit
Expired Queue TOS 8021P Blacklist Mirror DisScan ClassifyMedia
------- ----- --- ----- --------- ------ ------- -------------
High Yes
IPv4/6
------