Alcatel-Lucent AOS-W 6.5.3.x - Page 953

4
Expired Policies (due to time constraints) = 0
Under ClassifyMedia column, Yes indicates media classification is configured. To disable it, you must first
delete the ACL. Use the following commands:
(host) (config) #ip access-list session employee
(host) (config-sess-employee) #no any any svc-sips permit
You must add the rule any any svc-sips permit back to the ACL without the classify-media parameter:
(host) (config-sess-employee) #any any svc-sips permit
Viewing Lync/Skype for Business ALG Statistics using the CLI
This section describes the procedures to view Lync/Skype for Business ALG statistics using the CLI.
For detailed command parameters, see the AOS-W 6.4.x CLI Reference Guide.
n Viewing the list of Lync/Skype for Business Clients on page 953
n Viewing Call Detail Record for Lync/Skype for Business Calls on page 953
n Viewing Call Quality for Lync/Skype for Business Calls on page 953
n Viewing Lync/Skype for Business Call Trace Buffer on page 953
Viewing the list of Lync/Skype for Business Clients
Use the following command to display details of clients that are actively using Lync/Skype for Business. An
entry is created for clients that have actively participated in voice, video, desktop-sharing, or file-sharing
sessions.
(host) #show ucc client-info app skype4b
Viewing Call Detail Record for Lync/Skype for Business Calls
Use the following command to view the Call Detail Record for Lync/Skype for Business calls on the switch. This
command displays the last 512 call records for all the switch platforms.
(host) #show ucc call-info cdrs app skype4b
Viewing Call Quality for Lync/Skype for Business Calls
Use the following command to view the call quality information for Lync/Skype for Business voice and video
calls.
(host) #show ucc call-info cdrs detail
Viewing Lync/Skype for Business Call Trace Buffer
Use the following command to display the Lync/Skype for Business message trace buffer for the first 256
events. Events such as establishing voice, video, desktop sharing, and file transfer are recorded.
(host) #show ucc trace-buffer skype4b
Troubleshooting Lync/Skype for Business ALG Issues
The following sections describe the CLI commands to troubleshoot Lync/Skype for Business ALG issues.
Enabling Lync/Skype for Business ALG Debug Logs
Lync/Skype for Business ALG related debug logs are available under logs. Use the following command to
enable this:
(host) (config) #logging level debugging user process stm subcat voice
AOS-W 6.5.3.x | User Guide Voice and Video | 953