Alcatel-Lucent AOS-W 6.5.3.x - Page 954

954| Voice and Video AOS-W 6.5.3.x| User Guide
Viewing Lync/Skype for Business ALG Debug Logs
To view the Lync/Skype for Business ALG debug logs, use the following command:
(host) (config) #show log user all
Jul 18 15:33:09 :503188: <DBUG> |stm| |voice| vm_lync_create_call: mac(1c:ab:a7:2d:75:6b) num_
sessions(0) curr_session(0x1064f144)
Jul 18 15:33:09 :503188: <DBUG> |stm| |voice| VM: vm_lync_create_call:1001 LYNC INFO: Headers
are 2b00b11f-71e3-40a5-a1bf-386dc9d49eb6 sip:user@lyncqa.com sip:user1@lyncqa.com
Jul 18 15:33:09 :503188: <DBUG> |stm| |voice| vm_lync_update_session_sdp:1869 -- vc
(1c:ab:a7:2d:75:6b)
Jul 18 15:33:09 :503188: <DBUG> |stm| |voice| VM: vm_lync_update_session_sdp:1961 LYNC INFO:
copied 1 staus to call_info
Jul 18 15:33:09 :503162: <DBUG> |stm| |voice| VM: vm_lync_update_session_sdp 1963: Tx params
changed
Jul 18 15:33:09 :503188: <DBUG> |stm| |voice| vm_lync_update_session_sdp:1869 -- vc
(1c:ab:a7:2d:75:6b)
Jul 18 15:33:09 :503188: <DBUG> |stm| |voice| VM: vm_lync_update_session_sdp:1961 LYNC INFO:
copied 1 staus to call_info
Jul 18 15:33:09 :503162: <DBUG> |stm| |voice| VM: vm_lync_update_session_sdp 1963: Tx params
changed
Jul 18 15:33:09 :503126: <DBUG> |stm| |voice| VM: vm_lync_create_call 1023: Session created
and inserted successfully for call id 2b00b11f-71e3-40a5-a1bf-386dc9d49eb6, 10.XX.XX.208
Jul 18 15:33:09 :503188: <DBUG> |stm| |voice| VM: vm_lync_idle_startdialog_req:301 LYNC INFO:
vm_lync_create_call is success..
Jul 18 15:33:09 :503188: <DBUG> |stm| |voice| VM: vm_lync_idle_startdialog_req:309 LYNC INFO:
vm_lync_create_call() is success..
UCC Dashboard in the WebUI
The UCC dashboard gives a complete view of the UCC deployment in the switch. The UCC dashboard has two
levels of displaying statistics:
n UCC Dashboard Aggregated Display
n UCC Dashboard Per Client Display
UCC Dashboard Aggregated Display
The UCC Dashboard Aggregated Display shows an aggregated view of the UCC calls made in the switch. The
administrator can see a top level view of the call quality assessment, and further drill-down into a specific view
based on the analysis required.
Chart View
Navigate to Dashboard > UCC. The UCC page displays the overall health (in graphical format) of the UCC
deployment in the switch as shown in Figure 202.