Rockwell Automation Publication 290E-UM001B-EN-P - June 2012 75
Product Commissioning Chapter 3
Network Configuration
To access the network configuration, you will be prompted to login to the
Administrative Setting.
Figure 48 - Enter Network Password
The user will be prompted to enter the default User Name (Administrator).
The factory default password is blank. The user is expected to change the
password to avoid unauthorized access.
Figure 49 - Network Configurations
From this screen you can change the Ethernet Configuration. For example
in the above image the IP address will be changed to 10.10.10.101. Choose
“APPLY Changes” for new settings to take effect.
To Next Page
Loading...
