Allen-Bradley Logix5000 - Extended Error Codes

Rockwell Automation Publication 1756-RM003N-EN-P - October 2011 167
Input/Output Instructions (MSG, GSV, SSV, IOT) Chapter 4
Extended Error Codes
The RSLogix 5000 programming software does not display any text for the
extended error codes.
These are the extended error codes for error code 0001.
Extended
Error Code
(Hex)
Description
0100 Connection in use
0103 Transport not supported
0106 Ownership conflict
0107 Connection not found
0108 Invalid connection type
0109 Invalid connection size
0110 Module not configured
0111 EPR not supported
0114 Wrong module
0115 Wrong device type
0116 Wrong revision
0118 Invalid configuration format
011A Application out of connections
0203 Connection timeout
0204 Unconnected message timeout
0205 Unconnected send parameter error
0206 Message too large
0301 No buffer memory
0302 Bandwidth not available
0303 No screeners available
0305 Signature match
0311 Port not available
0312 Link address not available
0315 Invalid segment type
0317 Connection not scheduled
Extended
Error Code
(Hex)
Description