Rockwell Automation Publication 1756-RM003N-EN-P - October 2011 341
Move/Logical Instructions (MOV, MVM, BTD, MVMT, BTDT, CLR, SWPB, AND, OR, XOR, NOT, BAND, BOR, BXOR, BNOT) Chapter 7
Description: The BNOT instruction complements a boolean input.
Out = NOT In
Arithmetic Status Flags: Not affected
Fault Conditions: None
Execution:
Condition Function Block Action
Prescan No action taken.
Instruction first scan No action taken.
Instruction first run No action taken.
EnableIn is cleared EnableOut is cleared.
EnableIn is set The instruction executes.
EnableOut is set.
Postscan No action taken.
To Next Page
Loading...
Need help?
General
