Chapter 14 High-Speed Counter (HSC) instructions
348 Rockwell Automation Publication 2080-RM001D-EN-E - February 2015
3. Assign the rest of the values to the MyAppData variables as shown in the
following figure.
• In the Initial Value field, enter the value.
• See HSCAPP data type on page 314 for more information on the
description for each value
4. Assign the HSC command value:
• In the Initial Value field for the MyCommand variable, type 1.
• See HSCCmd values on page 313 for more information on command
values.
To Next Page
Loading...
