Alliance Laundry Systems CCN020KNF - Page 17

Option
Number
Option Dis-
play Description Default Value Value Range
b.
SEg-
Cycle Segment Program-
ming
— 1-8*
1.
SgEn
Segment Enable/Disable **
on/oFF
2.
FILL
Fill Step — —
a.
FLEn
Fill Step Enable/Disable **
on/oFF
b.
FLEU
Fill Level **
HI/nEd/Lo or 1-30
c.
tEnP
Fill Temperature **
CoLd/Uarn/Hot
35°F-194°F [2°C-90°C]
3.
SUPL
Supply Step — —
a.
SUEn
Supply Step Enable/Disable **
on/oFF
b.
dISP
Dispenser Options ** Design 1 models: display will
show Cx (compartment-ori-
ented) or Sx (supply-orient-
ed), depending on how option
5 (Supply/Compartment Dis-
penser Programming) is pro-
grammed.Design 2 and 3
models: Compartment and
Supply dispensing is program-
med separately.Press START
(enter) keypad to access op-
tions.
(i)
C2 or S1
Compartment #2/Supply #1
(Design 1 models)
**
on/oFF
(ii)
C3 or S2
Compartment #3/Supply #2
(Design 1 models)
**
on/oFF
(iii)
C4 or S3
Compartment #4/Supply #3
(Design 1 models)
**
on/oFF
(iiii)
S4
Supply #4 (Design 1 models) **
on/oFF
(1)
C2
Compartment #2 (Design 2
and 3 models)
**
on/oFF
(2)
C3
Compartment #3 (Design 2
and 3 models)
**
on/oFF
(3)
C4
Compartment #4 (Design 2
and 3 models)
**
on/oFF
(4)
S1
Supply #1 (Design 2 and 3
models)
**
on/oFF
(5)
S2
Supply #2 (Design 2 and 3
models)
**
on/oFF
Table 1 continues...
Programming Control
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
17 Part No. F8238101ENR11