Allied Telesis AT-8000S Series User Manual

Downloading Software with CLI
Downloading Software
Page 179
2. Enter the “copy” command to copy the software from the Stacking Master to the Stacking Member. To copy
the software from the Stacking Master to all the Stacking Members, use the “*” character instead of the
Stacking Member number, number 4 in this example.
3. Reboot the devices being updated. The allocated devices boot up with the updated boot and system files.
Console# copy unit://1/image unit://4/image

Allied Telesis AT-8000S Series Specifications

General

Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Humidity	5% to 95% non-condensing
Switching Capacity	104 Gbps
Forwarding Rate	77.4 Mpps
VLANs	4, 094
Layer 3 Features	Static routing, RIP v1/v2
Management	Web-based
Operating Humidity	10% to 90% non-condensing