Allied Telesis CentreCOM GS970M Series User Manual

TABLE 4. TWISTED PAIR CABLE REQUIREMENTS FOR THE 10/1000BASE-T
AND 100BASE-TX PORTS AT 1000MBPS
Cable type
1000Mbps
Non-PoE PoE PoE+
Cat 3: Standard TIA/EIA 568-B-
compliant
Category 3 shielded
or unshielded cabling with 100
ohm impedance and a
frequency of 16 MHz
No No No
Cat 5: Standard TIA/EIA 568-A-
compliant
Category 5 shielded
or unshielded cabling with 100
ohm impedance and a
frequency of 100 MHz
Yes Yes No
Cat 5e: Standard TIA/EIA 568-
B-co
mpliant Enhanced
Category 5 (Cat 5e) shielded or
unshielded cabling with 100
ohm impedance and a
frequency of 100 MHz
Yes Yes Yes
Cat 6 or 6a: Standard TIA/EIA
568
-B-compliant Category 6 or
6a shielded cabling
Yes Yes Yes
GS9790M Series Switch Installation Guide
29
Power budget The GS970M Series PoE switches have the following power budgets:
GS970M/10PS: 124 watts
GS970M/18PS: 247 watts
GS970M/28PS: 370 watts
This is the maximum amount of power the switches can provide at on
e
time to the powered devices.
The power requirements of the PoE devices determine the maximum
number
of devices the switch can support at one time. So long as the total
power requirements of the powered devices is less than the power budget
of the switch, the switch can supply power to all the devices. But if the total
power requirements exceed the power budget, the switch denies power to
one or more ports using a mechanism referred to as port prioritization.

Allied Telesis CentreCOM GS970M Series Specifications

General

Brand	Allied Telesis
Model	CentreCOM GS970M Series
Category	Switch
Language	English