GS9790M Series Switch Installation Guide
41
ecofriendly button
By pressing the ecofriendly button you can conserve energy.
When you press the ecofriendly button for 1 to 4 seconds, the front panel
port LEDs are disabled. You may use the button to turn off the LEDs when
you are not monitoring the switch. To turn the port LEDs on, press the
ecofriendly button for 1 to 4 seconds again. Toggling the LEDs does not
affect the network operations of the switch.
FIGURE 23. ECOFRIENDLY BUTTON ON A GS970M SERIES SWITCH
The ecofriendly button does not control the POWER LED or SD card
LED.
To Next Page
Loading...
Need help?
General
