Allied Telesis CentreCOM GS970M Series - Chapter 2: Installation

GS9790M Series Switch Installation Guide
45
Chapter 2: Installation
This chapter contains the following sections:
 “Reviewing safety precautions” on page 46
 “Selecting a site for the switch” on page 48
 “Cable specifications” on page 49
 “Unpacking the switch:GS970M/10 and GS970M/10PS” on
page 50
 “Unpacking the switch: GS970M/18 and GS970M/18PS” on
page 51
 “Unpacking the switch: GS970M/28” on page 52
 “Unpacking the switch: GS970M/28PS” on page 53
 “Installing the switch on a table or a desktop” on page 54
 “Removing the feet from a switch before installing it in an
equipment rack or on a wall” on page 55
 “Installing a GS970M/10 switch in an equipment rack” on page 56
 “Installing a GS970M/10PS switch in an equipment rack” on
page 59
 “Installing a GS970M/18, GS970M/18PS or GS970M/28 switch in
an equipment rack” on page 61
 “Installing a GS970M/28PS switch in an equipment rack” on
page 63
 “Installing a GS970M/10 switch on a wall” on page 65
 “Installing a GS970M/18, GS970M/28 or AT-GS970M PS Series
switch on a wall” on page 67
 “Cabling the switch” on page 69
 “Powering on the switch” on page 71
 “Starting a local management session” on page 73
 “Monitoring the initialization processes” on page 75
 “Installing optional SFP transceivers” on page 78