Altai Technologies Ltd. All rights reserved
C1n Series WIFI AP/CPE Web-admin Configuration Manual
TPS15-003_rev1.3
Figure 5-38 Radio Advanced Setting
Advanced Setting
AMPDU: Enable or Disable IEEE802.11n aggregation of MAC protocol data unit; if
enabled, C1n pushes aggregated MPDU (MAC protocol data units) into a single
PPDU (physical protocol data unit). This option may improve the throughput of
802.11n network. By default, it is enabled.
AMPDU Limit: Specify the maximum number of data frames that C1n pushes into a
single PPDU. The range is from 1 to 64. The default setting is 64.
AMSDU: Enable or Disable IEEE802.11n aggregation of MAC service data unit; if
enabled, C1n pushes aggregated MSDU (MAC service data units) into a single MPDU.
This option may improve the throughput of 802.11n network. By default, it is enabled.
To Next Page
Loading...
