140
The print result is faded
or has lines (black/
white)
(Lines printed while
feeding by 25.4 mm/1
inch could be
improved; however, you
cannot remove them
completely.)
As the paper feeding
amount varies depend-
ing on the paper being
used, white lines or
black lines may be
printed.
Adjust the alignment of paper feed.
On the [Printer Utilities] tab, click
[Printer Setting Utility].
When the PrinterSetting screen is dis-
played, click [Printer Adjustment] -
[Print Head Alignment], and perform
[Bi-directional Printing Adjustment].
See the following for details.
"How to Make Media Settings" on
page 172
"Print Head Alignment" on page 136
No. 3
[Banding Reduction] is
not selected.
When the paper type is set to other
than [Plain] or [Plain label], select
[Banding Reduction] to reduce black
lines or white lines when printing.
On the [General] tab, select
[Advanced] from [Print Settings],
click [Advanced...], and then select
[Banding Reduction].
When you select this, printing speed
may decline.
No. 3
[Quality] is not selected
in [Print Quality].
When the paper type is set to other
than [Plain] or [Plain label], select
[Quality] to reduce black lines or
white lines when printing.
From the printer driver’s [Print Set-
tings], set [Print Quality] to [Quality].
When you select this, printing speed
may decline.
No. 3
Roll paper is not loaded
correctly.
Open the roll paper cover, and load
the roll paper again.
For details, see
"Replacing Roll Paper
with Fanfold Paper" on page 66.
-
Fanfold paper is not
loaded correctly.
Place the stack of fanfold paper
straight at least 40 mm away from
the back of the printer.
For details, see "Replacing Fanfold
Paper with Roll Paper" on page 75.
No. 3
Trouble Description Recovery method
Image/
Illustra-
tion
To Next Page
Loading...