142
Print quality for bar-
codes is poor
The shutters on the
platen on the outer side
of the paper are set to
open.
When the shutters on the platen on
the outer side of the paper are set to
open, air current may cause printing
trouble; outer edges of the print
result may become blurry.
Follow the instructions on the label on
the top of the printer, and set the
shutters on the platen.
See "Shutter Adjustment" on page 40
.
No. 4
The paper you are using
differs from the paper
set in the [Media Type].
Check the paper you are using and
the [Media Type] settings.
For more information, see step 9 in
"Replacing Roll Paper with Fanfold
Paper" on page 66, or step 10 in
"Replacing Fanfold Paper with Roll
Paper" on page 75.
-
The resolution for the
printer and print data
do not match.
If the resolution for the printer and
print data do not match, barcodes
may not be printed correctly.
Match the resolution for the printer
and print data.
For TM-C3500, the resolution for print
data is set to 360 dpi for all [Print Set-
tings].
For more information on the barcode
generator application you are using,
see the manual supplied with the
application.
-
Trouble Description Recovery method
Image/
Illustra-
tion
To Next Page
Loading...