143
Chapter 3 Handling
3
Print quality for bar-
codes is poor
The width of the bars
has not been cor-
rected.
The width of the bars has to be cor-
rected to print barcodes correctly.
Use the barcode and 2D symbol
fonts that are installed with the
printer driver, or a barcode genera-
tor application to correct the width
of bars.
To be more precise, decrease one
pixel from the bars and increase one
pixel for the space between bars.
For more information on the barcode
generator application you are using,
see the manual supplied with the
application.
The width of the bars is not corrected
for the 2D symbols.
No. 4
Depending on the
paper you are using, ink
amount used to main-
tain the barcode print
quality may vary.
Set [Ink Profile].
On the [General] tab, select
[Advanced] from [Print Settings],
click [Advanced...] and then select
[Ink Profile and Brightness Adjust-
ment]. Set [Ink Profile] correctly.
For appropriate [Ink Profile] settings,
contact your dealer. (See
"How to
Make Media Settings" on page 172.)
You can also use the BSF file to set
[Ink Profile]. See "Exporting/Importing
Printer Driver Settings" on page 87.
-
The print result may be
blurry depending on
the thickness of the
paper being used.
Adjust the misalignment of bidirec-
tional printing.
On the [Printer Utilities] tab, select
[Printer Setting Utility]. When the Print-
erSetting screen is displayed, click
[Printer Adjustment] - [Print Head
Alignment] - [Bi-directional Printing
Adjustment].
See
"Print Head Alignment" on page
136.
-
Trouble Description Recovery method
Image/
Illustra-
tion
To Next Page
Loading...