General Safety Instructions
KE/KX/KG (RIGID) BAH0089-7 02.2020 11
2 General Safety Instructions
This section contains important information on safe operation of the
implement.
2.1 Obligations and liability
Comply with the instructions in the operating manual
Knowledge of the basic safety information and safety regulations is a
basic requirement for safe handling and fault-free implement opera-
tion.
Obligations of the operator
The operator is obliged only to let those people work with/on the im-
plement who
are aware of the basic workplace safety information and accident
prevention regulations.
have been instructed in working with/on the implement.
have read and understood this operating manual.
The operator is obliged
to keep all the warning symbols on the implement in a legible
state.
to replace damaged warning symbols.
If you still have queries, please contact the manufacturer.
Obligations of the user
Before starting work, anyone charged with working with/on the ma-
chine is obliged
to comply with the basic workplace safety instructions and acci-
dent prevention regulations.
to read and understand the section "General safety information"
of this operating manual.
To read the section "Warning symbols and other labels on the
implement" in this operating manual and to follow the safety in-
structions represented by the warning symbols when operating
the implement.
to get to know the implement.
to read the sections of this operating manual, important for carry-
ing out your work.
If the user discovers that a function is not working properly, then they
must eliminate this fault immediately. If this is not the task of the user
or if the user does not possess the appropriate technical knowledge,
then they should report this fault to their superior (operator).
To Next Page
Loading...
Need help?
General
