Cleaning, maintenance and repai
160 KE/KX/KG (RIGID) BAH0089-7 02.2020
12.11 Changing the oil filter in the cooling kit (specialist workshop)
1. Remove the oil filter cartridge:
2. Unscrew the bolts (Fig. 183/1).
3. Carefully remove the oil filter cartridge (Fig.
183/2), collect any escaping oil.
4. Replace the oil filter in the oil filter cartridge.
Fig. 183
12.12 Checking the wheel mark eradicators
The wheel mark eradicators are subject to natu-
ral wear.
To avoid damage or wear being caused to the
tool carriers, the tools may be worn to maximum
50 mm measured from the coulter tip (Fig.
184/1).
Fig. 184
To Next Page
Loading...
Need help?
General
