Use of the implement
KE/KX/KG (RIGID) BAH0089-7 02.2020 133
10.1 Filling the hopper (optional)
Observe the corresponding operating manuals when using the im-
plement with the GreenDrill catch crop seeding unit!
1. Switch off the control terminal.
2. Unlock the ascent (Fig. 140/1) and swivel it
down (Fig. 140/2). Use the step of the lad-
der as handle.
3. To fill and adjust the GreenDrill, use the
existing loading board (Fig. 141/1).
Fig. 140
4. The seed hopper cover has a threaded seal
(Fig. 141/2).
5. Open the seed hopper cover and slowly fill
the seed hopper. Do not exceed the
nominal volume.
6. Screw on the seed hopper cover so that the
seed hopper is closed air-tight.
7. To prevent collisions, the ladder should
always be folded up when it is not in use,
e.g. during operation and before road
transport.
Fig. 141
To Next Page
Loading...
Need help?
General
