Amazone KX Series User Manual

Cleaning, maintenance and repai
r
144 KE/KX/KG (RIGID) BAH0089-7 02.2020
12.2 Cleaning the machine
 Pay particular attention to the brake, air and hydraulic hose
lines.
 Never treat brake, air and hydraulic hose lines with fuel, ben-
zene, petroleum or mineral oils.
 After cleaning, grease the implement, in particular after cleaning
with a high pressure cleaner/steam jet or liposoluble agents.
 Observe the legal regulations for handing and disposing of
cleaning agents.
Cleaning with a high-pressure cleaner/steam cleaner
What should be observed when cleaning with a high-pressure
cleaner/steam cleaner:
 Do not clean any electrical components.
 Do not clean any chromed components.
 Never aim the cleaning jet from the cleaning nozzle of the high
pressure cleaner/steam jet directly on lubrication points, bear-
ings, rating plate, warning signs, and stickers.
 Always maintain a minimum nozzle distance of 300 mm between
the high pressure cleaner/steam jet cleaning nozzle and the im-
plement.
 The set pressure of the high-pressure cleaner/steam jet must
not exceed 120 bar.
 Comply with safety regulations when working with high pressure
cleaners.

Amazone KX Series Specifications

General

Brand	Amazone
Model	KX Series
Category	Farm Equipment
Language	English