AMERITECH AM8a - Page 100

AM8a Instruction Manual (18-0037) RS232 Entries and Printouts
0037-S07.L_58 February 10, 2000
7-11
(ADA) DT START: DIALTONE RCVDms (min). (ADA) = <0> to 9999. 4.3
(ADB) DT START: DIALTONE RCVD /max. (ADB) = 0 to <3000> to 9999. 4.3
(AD1) DLY STRT: STRT BGNms (min). (AD1) = 0 to <15> to 999. 4.4.1
(AD2) DLY STRT: STRT BGN /max. (AD2) = 0 to <300> to 999. 4.4.1
(AD3) DLY STRT: ENDms (min). (AD3) = 0 to <140> to 9999. 4.4.2
(AW1) WINK STRT: WINK BGNms (min). (AW1) = <15> to 999. 4.5.1
(AW2) WINK: DURms (min). (AW2) = 50 to <140> to 999. 4.5.1
(AW3) WINK: DUR /max. (AW3) = 50 to <290> to 999. 4.5.2
(AP1) PULSE: SPEEDpps (min). (AP1) = 5.0 to <8.0> (Min.) to 25.0. 4.6.1 (1)
(AP2) PULSE: SPEED /max. (AP2) = 5.0 to <12.0> to 25.0. 4.6.1 (1)
(AP3) PULSE: BREAK% (min). (AP3) = 20 to <50> to 85. 4.6.2 (1)
(AP4) PULSE: DIAL BREAK /max. (AP4) = 20 to <70> to 85. 4.6.2 (1)
(AP5) PULSE: INTRDIGIT (min). (AP5) = 120 to <300> to 999 msec. 4.7.1 (2)
(AT1) DTMF/MF: LO BANDdb (min). (AT1) = -30 to <-15> to –3 dBm. 4.8.1 (1)
(AT2) DTMF/MF: LO BAND /max. (AT2) = -30 to <-3> dBm. 4.8.2 (1)
(AT3) DTMF/MF: HI BANDdb (min). (AT3) = -30 to <-15> to –3 dBm. 4.8.2 (1)
(AT4) DTMF/MF: HI BAND /max. (AT4) = -30 to <-3> dBm. 4.8.2 (1)
(AT5) DTMF/MF: TWISTdb (min). (AT5) = -12 to <-6> to +12. 4.9.2 (2)
(AT6) DTMF/MF: TWIST /max. (AT6) = -12 to <6> to +12 dBm. 4.9.2 (2)
(AT7) DTMF/MF: FREQ% (max). (AT7) = 0 to <1.5> (±) to 3.5 dBm. 4.9.1 (2)
(AT8) DTMF/MF: TONE ON (min). (AT8) = 25 to <35> to 99 msec. 4.10.1 (3)
(AT9) DTMF/MF: TONE/OFFms (min). (AT9) = 25 to <35> to 99 msec. 4.10.1 (3)
(ATA) DTMF/MF: GUARDms. (ATA) = 0 to <20> to 99. 4.10.2 (3)
(ATT) THRESHOLD: TONEdBm (min). (ATT) = -40 to <-30> to 0 dBm. 4.11.1
(AHT) THRESHOLD: OFF HKvdc (min). (AHT) = 2 to <35> to 60 volts. 4.11.2