AMERITECH AM8a - Table 7-6. RS232 Auto Dial Setup Commands

RS232 Entries and Printouts (18-0037) AM8a Instruction Manual
February 10, 2000 0037-S07.L_
7-12
Table 7-6. RS232 Auto Dial Setup Commands
COMMAND DEFINITION
(S0=ddd…d) thru
(S9=ddd…d)
STORE AUTO DIAL number 0 up to 60 characters ddd…d. through
STORE AUTO DIAL number 9 up to 60 characters ddd…d.
ddd…d
1 thru 9, 0 Dialed digit 1 (TT, DP, or MF) through
Dialed digit 9 (TT, DP, or MF)
Dialed digit 0 (TT, DP, or MF)
*
#
* (TT) or KP (MF)
# (TT) or ST (MF)
A
B
C
D
A (TT or MF)
B (TT or MF)
C (TT or MF)
D (TT)
P
W
-
F
U
T
SPACE
WAIT DT (Wait for Dial-Tone) [1]
WAIT WINK [2]
WAIT [3]
FLASH [4]
UNBALance (line) [5]
TOGGLE DIAL [6]
BLANK [7]
(S0) thru (S9), (S*) RECALL AUTO DIAL number 0 through
RECALL AUTO DIAL number 9
RECALL last number dialed
[SHIFT] + [RECALL] + [0] through [9] or [*] (must be in EVENTS Display mode)
(SD0) thru (SD9) Speed Dial AUTO DIAL number 0 through
Speed Dial AUTO DIAL number 9