AM8a Instruction Manual (18-0037) RS232 Entries and Printouts
0037-S07.L_58 February 10, 2000
7-21
(PAL) RS232 command equivalent
Configuration setup:
Test Set ID † (CTD) = Switch
Test mode (CEM) = Monitor
Analog Impedance (CIR) = 900
Trunk type (CTT) = E&M 4 Wire
* E&M type (CET) = 1
Analog/PCM (CTA) = PCM LOOP CLOCK
** PCM configuration (CTC) = PCM1
** PCM framing (CFM) = D3/D4
** PCM zero suppression (CZS) = AMI
** PCM channel (CTH) = 01
** OFF HK a/b (CS1) = Auto
** ON HK a/b (CS2) = Auto
** SLC® TYPE (CST) = SINGLE PARTY
Display Mode (CDM) = new call reset
DIGIT DET (CDI) = narrow
SLC® MSG (CSM) = 0000000001
"T/t" MASK (CMK) = No
@ RS232 Baudrate (CBR) = 9600
@ RS232 Parity Setup (CPT) = none parity
@ Carriage Return Delay (CCD) = 00
@ Security Password (CPW) = no
@ Security Setup Protect (CSU) = yes
Auto Print Setup (CAE) = off
@ DATE (CMM) (CDD) (CYY) = 05/19/93
@ TIME (CHH) (CMT) = 16:31:35
CPU Version — = 105
DSP 0 Version — = 100
DSP 1 Version — = 100
No emulation setup for Monitor type
Analyze setup:
Hook flash time †† (AHF) = 0450
Hook disconnect time (AHD) = 1000
Start Signal Expected (AWD) = Dialtone/Wink
Dial tone receive (min) (ADA) = 0000
Dial tone receive (max) (ADB) = 3000
Delay begin (min) (AD1) = 0000
Delay begin (max) (AD2) = 0300
Delay end (min) (AD3) = 0140
Wink begin (min) (AW1) = 0015
Wink duration (min) (AW2) = 0140
Wink duration (max) (AW3) = 0290
Dial pulse speed (min) (AP1) = 080
Dial pulse speed (max) (AP2) = 120
Dial pulse break (min) (AP3) = 50
Dial pulse break (max) (AP4) = 70
Dial pulse IDT (min) (AP5) = 300
TD low band (min) (AT1) = - 15
TD low band (max) (AT2) = - 03
TD high band (min) (AT3) = - 15
TD high band (max) (AT4) = - 03
TD twist (min) (AT5) = - 06
TD twist (max) (AT6) = 06
TD frequency tolerance(max) (AT7) = 01.5
TD tone on time (min) (AT8) = 35
TD tone off time (min) (AT9) = 35
TD guard time (ATA) = 20
Tone threshold (min) (ATT) = - 30
ON/OFF Hook threshold (min) (AHT) = 35
Speed/auto dial setup:
number 0 = 1234567890
number 1 =
number 2 = 1213456789
number 4 = 1213T*456#T1213456
number 5 =
number 6 =
number 7 =
number 8 =
number 9 =
Figure 7-7. Manual Long Print (Setup Example)
To Next Page
Loading...