Introduction
1-2 TM-F1OP-C1XN-01
Description
This series of power supplies provides low-noise, precisely regulated,
variable DC output at 1200 Watts of output power. Over voltage
protection (OVP) and thermal shutdown are standard. Front panel
controls and indicators are extensive. Select from several remote control
choices: standard analog programming, optional isolated programming or
readback, and optional GPIB programming or RS-232 control. Remote
monitoring of output voltage and currents is a standard feature. Use this
power supply either on your bench or in a standard 19 in. (483 mm) rack:
the power supply occupies only 1.75 in. (1 U) of vertical rack space.
Designed for continuous use in standalone or systems applications, this
power supply is typically used to power DC equipment, control magnets,
or burn in components. See Table 1-1 for the list of available models.
Table 1-1
Available Voltage and Current Ranges
Model Voltage Range Current Range
6–200 0–6 V 0–200 A
7.5–140 0–7.5 V 0–140 A
12–100 0–12 V 0–100 A
20–60 0–20 V 0–60 A
35–35 0–35 V 0–33 A
40–30 0–40 V 0–30 A
60–20 0–60 V 0–20 A
100–12 0–100 V 0–12 A
300–4 0–300 V 0–4 A
600–2 0–600 V 0–2 A
TM-F1OP-C1XN-01.book Page 2 Thursday, October 25, 2007 9:04 PM
To Next Page
Loading...
