Features and Options
TM-F1OP-C1XN-01 1-3
Features and Options
• Simultaneous digital display of both voltage and current.
• Ten-turn front panel voltage and current controls for high resolution
setting of the output voltage and current from zero to the rated output.
• Automatic mode crossover into current or voltage mode.
• Front panel push-button control of output standby mode and preview
of voltage, current, or OVP setpoints. Front panel light emitting diode
(LED) indicators for voltage and current mode operation, OVP,
remote programming mode, and shutdown. Front panel control of
OVP.
• Multiple units can be connected in parallel or in series to provide
increased current or voltage.
• Thermal shutdown, latching or auto reset.
• Remote analog voltage and current limit programming with selectable
programming ranges.
• External monitor signals for output voltage and current.
• Isolated analog remote programming control of the output voltage or
current and isolated readback of output voltage and current with the
optional ISOL Interface.
• Optional internal GPIB or RS-232 control for remote digital
programming and readback from a computer.
Front Panel Controls
See Figure 1-1 to review the controls, LEDs, and meters located on the
power supply’s front panel. Check the following sections for additional
descriptions of front panel controls and functions.
• “Mechanical Specifications” on page A–11
• “Functional Tests” on page 2–10
• Chapter 3, “Local Operation”
TM-F1OP-C1XN-01.book Page 3 Thursday, October 25, 2007 9:04 PM
To Next Page
Loading...
