EasyManua.ls Logo

Angelo AT 61E - General Information; Instructions and Warnings for the Reader; Purpose of the Manual; Identification of Manufacturer and Appliance

Angelo AT 61E
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 2 -
3378702_ATE_inst_GB ENGLISH
GB
INSTRUCTIONS AND WARNINGS FOR THE READER
To nd the speci c topics of interest to you quickly, refer to the index at the start of the manual.
This manual manuale contains all the information necessary for special categories of reader, i.e.
all skilled operators authorised to handle, transport, install, service, repair and scrap the appli-
ance.
PURPOSE OF THE MANUAL
The manufacturer has produced this manual, which forms an integral part of the appliance, to
provide the necessary information for those authorised to interact with it during its working life.
As well as adopting good practices for use, the manual’s intended readers must read it thor-
oughly and apply its instructions to the letter.
This information is provided by the manufacturer in the original language (Italian)
and is translated into other languages to meet legal and/or business requirements.
Reading this information will avoid health and safety risks to people and  nancial losses.
Keep this manual in a clearly identi ed safe place throughout the working life of the appliance,
so that it will always be available when required for consultation.
The manufacturer reserves the right to make changes without any obligation to provide any
prior notice.
A number of symbols have been used to highlight particularly important parts of the text or
important speci cations. Their meaning is as de ned below.
Caution - Warning
Indicates that suitable procedures must be adopted to avoid putting peoples health and
safety at risk or causing economic losses.
Important
Indicates particularly important technical information which must not be overlooked.
IDENTIFICATION OF MANUFACTURER AND APPLIANCE
The nameplates shown here are  tted directly to the
appliance. It contains references and all essential in-
formation for operating safety.
A) Appliance model
B) Type of customisation
C) Manufacturer identi cation
D) Insulation class
E) Year of construction
F) Serial number
G) Protection rating
H) Country of destination
L) Voltage (V)
M) Absorption (A)
N) Frequency (Hz)
P) Rated power (kW)
Q) Test voltage indicator
R) Date of construction
S) WEEE Symbol
GENERAL INFORMATION
400V3N ~ A Hz kW
A BC DEFSGH
RPNML
Q

Table of Contents