- 13 -
3378702_ATE_inst_GB ENGLISH
GB
REPLACING THE FUSE
To carry out this operation, proceed as follows.
) Undo the screws to remove the side panel (A).
) Open the fuse-holder (B) and replace the damaged fuse (C).
) Replace the fuse-holder and the side panel when the operation is complete.
A
B
C
CHANGING THE LAMP
A
B
C
D
To carry out this operation, proceed as follows.
) Loosen the screws of the lamp cover (A).
) Remove the side panel (B).
) Unscrew the screws to remove the lamp holder (C).
) Extract and replace the lamp (D).
Caution - Warning
During the procedure, take care not to touch the
lamp directly; wear protective gloves if necessary.
) Reassemble ev
erything when the operation is com-
plete.
To Next Page
Loading...