1-4 Replaceable Parts Chapter 1 — General Information
1-6 PN: 10580-00342 Rev. D MS2720T MM
e. When ordering the Main PCB Assembly, in order to ensure installation of correct options, all options that are installed on the
instrument must be declared on the order. This should include all the hardware and software options that make up the respective
unit. The options are listed on a label on the back of the MS2720T and are also shown in the System (Shift 8) / Status display.
3-71650-1 Case Top Only (excludes model ID Label, LCD, Touch screen, rotary switch,
speaker and keypad items)
3-61365-1 Case Bottom Only (excludes all Tilt Bail components)
3-65314 Left and Right Tilt Bail (Plastic) Holders
3-65316 Tilt Bail Stand (Metal)
3-65684 Tilt Bail (Plastic) Clip
3-73312-9 Model MS2720T with 9 kHz - 9 GHz ID Label (option 709)
3-73312-13 Model MS2720T with 9 kHz - 13 GHz ID Label (option 713)
3-73312-20 Model MS2720T with 9 kHz - 20 GHz ID Label (option 720)
3-73312-32 Model MS2720T with 9 kHz - 32 GHz ID Label (option 732)
3-73312-43 Model MS2720T with 9 kHz - 43 GHz ID Label (option 743)
3-61379-1 Battery Door
633-75 Li-ion Battery Pack 7.5 Ah
3-67146 Type N RF Input connector (N JACK-SMA JACK)
3-71353 Type K(m) Rugged RF Input connector
ND70948 Fan Assy
40-187-R AC to DC Power Converter
3-74999-3 Main Keypad PCB
3-71641 Main Keypad (Rubber)
ND75321 Speaker Assy with Gaskets
3-410-103 Rotary Encoder (excluding knob)
3-61360-2 Encoder Knob (excluding encoder)
3-61470 Hand Strap
3-61571 Plastic, Ring Holder
Table 1-4. List of Replaceable Parts (2 of 2)
Part Number Description
To Next Page
Loading...
