Anritsu Spectrum Master MS2720T Maintenance Manual

MS2720T MM PN: 10580-00342 Rev. D 2-1
Chapter 2 — Spectrum Analyzer Verification
2-1 Introduction
This chapter describes the verification process for the spectrum analyzer options in the MS2720T
Spectrum Master. Verification tests that are associated with other instrument options are described in
Chapter 3.
The following tests are in this chapter:
• “Frequency Accuracy Verification” on page 2-2
• “Single Side Band (SSB) Phase Noise Verification” on page 2-5
• “Spurious Response Verification” on page 2-7
• “Input Related Spurious (IRS) Signals Verification” on page 2-9
• “Resolution Bandwidth Accuracy Verification” on page 2-12
• “Absolute Amplitude Accuracy Verification” on page 2-14
• “Residual Spurious Response Verification” on page 2-20
• “Displayed Average Noise Level (DANL)” on page 2-22
• “Third Order Intercept (TOI)” on page 2-23

Anritsu Spectrum Master MS2720T Specifications

General

Brand	Anritsu
Model	Spectrum Master MS2720T
Category	Measuring Instruments
Language	English