Anritsu Spectrum Master MS2720T - Option 883, TD-LTE Signal Analyzer Verification

Chapter 3 — Options Verification 3-8 Option 883, TD-LTE Signal Analyzer Verification
MS2720T MM PN: 10580-00342 Rev. D 3-29
3-8 Option 883, TD-LTE Signal Analyzer Verification
The tests in this section verify the functionality of the TD-LTE Signal Analyzer of the MS2720T Spectrum
Master. Tests are established for TD-LTE Channel Power Accuracy Tests and Frequency Error Tests
Equipment Required for MS2720T with option 709, 713 or 720
• Anritsu MG3700A Vector Signal Generator
• Frequency Reference Symmetricom Rubisource T&M
• Power Meter, Anritsu Model ML2438A
• Power Sensor, Anritsu Model MA2482D
• Power Splitter, Aeroflex/Weinschel Model 1870A
• Fixed Attenuator, Aeroflex/Weinschel Model 44-6 (2)
• Anritsu 34NN50A 50 ohm Adapter (2)
• Anritsu 15NN50-1.5C RF Coaxial Cable
• BNC male to BNC male Coaxial Cable
Equipment Required for MS2720T with option 732 or 743
• All of the above, plus
• Anritsu 71693-R Ruggedized K(f) to N(f) Adapter