6-4 TD-LTE Modulation Measurements TD-LTE Signal Analyzer
6-14 PN: 10580-00234 Rev. T 3GPP MG
Control Channel Power
1. Press the Measurements main menu key.
2. Press the Modulation submenu key.
3. Press the Control Channel Power submenu key to activate the Control Channel Power
display in table format (Figure 6-9). Press the key again to view or change the Display
Mode and Control Channel EVM settings.
4. Press the Back submenu key to return to the Modulation menu.
Figure 6-9. Control Channel Power
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
Need help?
General
