Anritsu Spectrum Master MS2720T User Manual

6-6 Pass/Fail Tests TD-LTE Signal Analyzer
6-22 PN: 10580-00234 Rev. T 3GPP MG
6-6 Pass/Fail Tests
1. Press the Measurements main menu key.
2. Press the Pass/Fail Test submenu key to activate the Pass/Fail display in table format
(Figure 6-14). Press the Pass/Fail Test submenu key again to select a Pass/Fail test.
a. Press the Select Pass/Fail Test submenu key to open the Select Pass Fail Test
window. Highlight the desired test with the arrow keys or rotary knob and press
Enter to start the test. Refer to the instrument User Guide and the Master
Software Tools (MST) User Guide for creating new Pass/Fail tests.
b. Press the Reset submenu key to erase a previous measurement/s and restart the
Pass/Fail test.
3. Press the Back submenu key to return to the Measurements menu.
Figure 6-14. Past/Fail Test
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com

Anritsu Spectrum Master MS2720T Specifications

General

Brand	Anritsu
Model	Spectrum Master MS2720T
Category	Measuring Instruments
Language	English