14
Numeric figure nine during frequency input. Selection of memory/scan bank “I” or “i” and search bank “I”
or “i” or “S” or “s”.
will delete the currently displayed memory channel during memory
read or scan.
accesses the delete menu where search banks, VFO pass
frequencies, memory banks, select channel tags, channel protect status & memory pass tags may be
deleted.
Numeric figure zero during frequency input. Selection of memory/scan bank “J” or “j” and search bank
“J” or “j” or “T” or “t”.
to toggle the AFC (Automatic Frequency Control) facility on/off, the
LCD legend “AFC” confirms selection.
to access the clone
(copy between radio)
menu. A special
RS232 male-male, pin-pin lead will be required.
Numeric decimal during MHz format frequency input. Used in memory and search as a CASE SHIFT
key to toggle between UPPER and LOWER case banks.
to access the frequency offset menu.
to access the sleep timer menu.
Used as an ENTER key to accept data entry.
during VFO operation to write the current frequency to QUICK MEMORY where the
key sequence ð recalls quick memory. The ïð keys may be used to cycle
through the quick memories, the LCD legend “«” indicates when a quick memory has been recalled.
to enter the current frequency in to one of the 1,000 memory channels.
to access the text search menu.
Section 1-5-2
To Next Page
Loading...
