DRAFT
October 22, 2010 3:44 pm, Safety_HW.fm
xxii
EMC
This instrument meets European requirements for emission and immunity (EMC
Directive 89/336/EEC). This instrument has been tested to and complies with
standard EN 61326 (Group 1, Class B), “Electrical Equipment for Measurement,
Control and Laboratory Use – EMC Requirements.”
Australian EMC
Standards
This instrument has been tested to and complies with standard AS/NZS 2064,
“Limits and Methods Measurement of Electromagnetic Disturbance Characteristics
of Industrial, Scientific, and Medical (ISM) Radio-frequency Equipment.”
To Next Page
Loading...
