Applied Biosystems 2720 User Manual

6-6 Maintenance
4 Remove the two fuses from the fuse holder and replace them with two of the same
type (as specified on label found on rear of instrument).
5 Return the fuse holder to the instrument, and close the fuse compartment door.
Press it until it locks into place.
6 Connect the instrument power cord.
To replace the fuses: (continued)
Step Action
GR1991
Fuse holder
Fuse

Applied Biosystems 2720 Specifications

General

Brand	Applied Biosystems
Model	2720
Category	Laboratory Equipment
Language	English