Applied Biosystems 7500 User Manual

Chapter 2 Unpacking and Setting Up the Instrument
Setting Up the 7300/7500/7500 Fast Instrument
22 Applied Biosystems 7300/7500/7500 Fast Real-Time PCR System Installation and Maintenance Guide
Notes
9. Close the tray door, then press the power button
again to power off the instrument.
Note: When closing
the instrument tray
door, apply pressure to
the right side of the
tray and at an angle.
If you have additional hardware that you want to
install (see page 9), do so now.
Do not connect the USB cable to
the 7300/7500/7500 Fast instrument or computer at
this time.
Press
here
Press
here

Applied Biosystems 7500 Specifications

General

Detection Method	Fluorescence
Sample Capacity	96-well plate
Thermal Cycler	Yes
Temperature Uniformity	±0.5°C
Type	Real-Time PCR System
Thermal Accuracy	±0.25°C
Detection Channels	5
Weight	45 kg
Power Requirements	100-240 V, 50/60 Hz
Dynamic Range	9 logs
Reaction Volume Range	10-100 µL
Temperature Range	4°C to 100°C
Thermal Cycler Block	96-well
Software	SDS Software
Detection	Multiplex (up to 5 colors)