Octave Configuration Guide 7
3. If this is the first time you are logging in, tap Settings (bottom-right) and in
the Connection tab select the NFC check box.
4. Tap Back to return to the log in page.
5. In the Password box enter the password that was provided to you by Arad
IT personnel when installing the application, and then tap Login.
The application opens.
The left panel provides tabs for reaching the various configuration options.
The tabs are arranged in the logical configuration sequence. The meter is
supplied with configuration defaults, which you may need to change per
your specific setup.
In the following chapters we describe the various configuration options
provided in each of these tabs.
To Next Page
Loading...
Need help?
General
