Octave Configuration Guide 37
Alarms – select the check boxes of the alarm conditions that will be included in
the telegram, if the Alarms check box was selected.
• Low Battery
• Measurement Fail
• Leakage
• Flow Rate Alarm
Pulse
Mode – set the pulse’s accumulated volume output mode:
• “Disable” – output is disabled
• “Forward” – pulse output is a measure of forward volume
• “Reverse” – pulse output is a measure of reverse volume
• “Net” – pulse output is a measure of forward volume minus reverse
volume
Units – set
the measuring units for the meter’s pulses:
• m
3
– cubic meters
• Ft
3
– cubic feet
• GAL – gallons
• IGAL – imperial gallons
• A.F. – acre feet
• A.I. – acre inch
• Barrel
To Next Page
Loading...
